Samsung Clone J7 Pro Mtk 6580 Flash File By khokon
Samsung Clone J7 Pro Mtk 6580 Flash File By khokon
Samsung Clone J7 Pro Lcd Fix HANG LOGO FIX DONE STOCK-ROM
Samsung Clone J7 Pro Flash File Firmware Password Protected
Samsung Clone J7 Pro ফাইলটি ১০০% টেস্ট করা আপনি নিশ্চিন্তে ফ্ল্যাশ করতে পারেন, ফাইল যদি কাজ না করে ১০০% টাকা ফেরত ।
আসসালামু আলাইকুম, আপনারা যারা Samsung Clone J7 Pro মোবাইল ফ্ল্যাশ করে সেট ডেড বা HANG LOGO /LCD White করে ফেলছেন ,আমার এই ফাইল দিয়ে ফ্ল্যাশ করেন আপনার ফোন ১০০% ঠিক হয়ে যাবে ইনশাআল্লাহ্ ।
Wait for phone...
Phone found! [ 8 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 1501004E35585A4D4201C2F4C68D210B
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BMZX5
[eMMC] : FLASH_CID : 1501004E35585A4D4201C2F4C68D210B
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
DEV RID : 0x733B1038FF65A60DBAC7870B316FD4C4
INT RAM : 0x00020000
EXT RAM : 0x20000000 [512 MiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!
[AP] : Initial info read Ok!
Brand : Samsung
ProdName : SM-J7 pro
ProdModel : SM-J7 pro
Device : SM-J7 pro
AndroidVer: 6.0
MTKxCPU : MT6580
MTKxPRJ : ALPS.L1.MP6.V2_AEON6580.WEG.L_P73
Done!
Elapsed: 00:00:07
Reconnect Power/Cable!
Samsung Clone J7 Pro Hang Logo Fix Rom, Samsung Clone J7 Pro Dead Recovery File, Samsung Clone J7 Pro Stuck On Logo, Flashing Error Fix, Samsung Clone J7 Pro Restart Problem Solved, Samsung Clone J7 Pro Auto Recovery Mode Fixed, Samsung Clone J7 Pro Unfortunately App has been stopped, Samsung Clone J7 Pro Frp Lock Remove, Samsung Clone J7 Pro Display Black or White Fix, Samsung Clone J7 Pro Dead After Flash Fix, Samsung Clone J7 Pro All Software Problems Solved, Samsung Clone J7 Pro Pattern lock, Password Lock, Screen Lock, Pin Lock, Privacy Lock Fix, Samsung Clone J7 Pro Bootloop, Unbrick, Imei Null, Baseband Unknown Fix.
HOW TO FLASH MTK/SPD Flash Tool
1.Download Flash File/ Winrar/SP/Spd Flash Tool/Usb Driver
2.Download And Extract The Stock Or Firmware On Your Computer
3.After Extracting You Will Find The SP/SPD Flash Tool, Driver And Instruction Manual
4.Install the USB Drivers Skip If Drivers Are Already Installed
5.Open The SP/SPD Flash Tool And load The scatter/pac File From The Firmware Folder
6.Connect Your Smartphone To The Computer Using The USB Driver
7.Click on Upgrade / Download Button In The SP/SPD Flash Tool To Begin The Flashing
8.Green Ring Will Appear At The End Of Successful Flash Done
Importent Note: Take Backup Of Your Personal Data Before Flashing or Installing The Firmware On Your smartphone. As this Helps You To Recovery The Mobile Data Whenever Any Thing Wrong Happens.
